Mother and Baby On Stand Fountain Water Feature

Code: PWFL8056
EAN: 5060119855729


RRP: £202.00

£176.75

Qty:

FREE Delivery normally within 5 working days within the UK and the Rep. of Ireland

Mother and Baby On Stand Fountain Water Feature Overview

Mother and Baby On Stand Fountain Water Feature

Self Contained Water Feature for Your Home or Garden

 Water is a dynamic, light enhancing addition to any landscape.

The relaxing, peaceful and tranquil qualities of water, have inspired many ancient and modern garden designs. With this in mind, this beautifully designed and low priced water feature has been carefully selected by us, for your attention. So you can buy with confidence.

This Mother and Baby On Stand Fountain Water Feature is:

  • Self contained
  • Suitable for outdoors and indoor use
  • Easy to install
  • Just add water and connect to electric supply
  • Mains pump included and supplied with 10m of cable
  • Supplied with low voltage lights
  • Frost resistant
  • Heavy weight, durable Polyresin design
  • Compliant with applicable IP and BS standards

Dimensions : Length 59cm x Width 59cm x Height 130cm

Delivery is inclusive to all UK mainland destinations.

Delivery and returns

FREE UK DELIVERY on orders £40.00 or more
£3.95 delivery on orders under £40.00 

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 7 working days from receipt of your order, though this may vary throughout the season. Please contact us now if delivery time is critical. All Sizes are approximate and for guidance only

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information
Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electricial cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains.

A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit.

A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of teh pump cable using a watertight cable connector.

A means of disconnection from the supply having a contact deperation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.