Indispensable for holiday feeding, the Automatic Fish Feeder can be mounted on a pond wall or suspended above the pond using the supplied stand. The Automatic Fish Feeder is simple to operate via a single control that incorporates a battery-operated clock and a frequency dial which gives a choice of up to six feeds per day. The food chamber holds up to 800ml of fish food.

The timer can be set for “minutes & seconds” (with 1 second being the ultimate minimum), and as a consequence this makes the autofeeder suitable for the smallest of ponds. It is believed that this facility makes the Cloverleaf Auto Fish Feeder totally unique in the value for money stakes.

The Fish Mate P21 feeder is particularly suited for use with floating food sticks; but is also suitable for use with all popular fish foods. Timing of feed and amount dispensed can be controlled. The maximum number of feeds will normally range from about 40 for a small pond to 8 for a large pond

Feeds your goldfish or koi when you're away. This feeder block slowly releases nutritious pellets made of plant protein, vitamins, and minerals. It's bound with calcium sulfate to ensure the pellets are released slowly, so there's no waste or pond pollution.

A simple programmable fish feeder unit, ideal for holidays or ensuring a controlled diet for you fish.

Digital programming The Fish Feeder Pro has been developed especially to supply fish with the quantities of feed they require up to 20 times per twenty-four hours; dosage and frequency can be programmed easily. Especially for lovers of koi sophisticated feeding for this kind of fish is important to obtain optimum growth and range of colouring. As all the feed will be eaten, the pond environment will not be overloaded and fish will remain healthy. A healthy stock of fish with constant growth will be obtained by feeding measured quantities several times a day. Especially during holiday periods and in less favourable weather conditions fish will be 'forgotten' at times. This automatic feeder is supplied with four worm wheels, 3 of which have been designed especially for grain and pellet feed with a diameter of 3 to 12 millimetres. The fourth worm wheel is meant for flaky feed. The special design of the feed container and the feeding mechanism will prevent moisture from entering and contacting the feed. Fastening of the base in the ground, to the wall, fastening on a pile or with a cord.